Detectorguru
New member
Some things I do not like.
Small meter face. Hard to see if your eyes are not what they use to be. This was indoors .Not sure what will happen with the sun's glare.
I'm tall and when the detector is extended all the way out the coil feels heavy and the shaft wobbles. The good news is I will not need a tall mans rod.
Broadband interference is high in suburbia. I hunt for relics so this usually does not interfere in my hunts.
The pros.
I like the pro mode audio features. The recovery speed is fast The detector responds well to both high and low conductive metal.
The manual is an easy read.
The detector depth is excellent in pro mode but if your getting allot of interference and changing frequencies does not help you will need to lower the sensitivity.
Ground balance is easy to do and fast. The touchpads are easy to hit and respond well to normal touch.
Off to the field on Saturday to a colonial site loaded with nails. This should be a good first test of both the iron id and target masking.

Small meter face. Hard to see if your eyes are not what they use to be. This was indoors .Not sure what will happen with the sun's glare.
I'm tall and when the detector is extended all the way out the coil feels heavy and the shaft wobbles. The good news is I will not need a tall mans rod.
Broadband interference is high in suburbia. I hunt for relics so this usually does not interfere in my hunts.
The pros.

I like the pro mode audio features. The recovery speed is fast The detector responds well to both high and low conductive metal.
The manual is an easy read.
The detector depth is excellent in pro mode but if your getting allot of interference and changing frequencies does not help you will need to lower the sensitivity.
Ground balance is easy to do and fast. The touchpads are easy to hit and respond well to normal touch.
Off to the field on Saturday to a colonial site loaded with nails. This should be a good first test of both the iron id and target masking.