Swung the ML Pro 11in a "worked out" site:

[digitrich]

BUY ONE NOW!!!!!!! Makes my SE feel as light as my F-75 AND it gets much better separation than the stock coil and some coils smaller than it!. It almost feels like the processor on my SE is quicker, which is impossible, but because of the quick separation and the sharpness of how it locks on targets, oh boy, THIS IS A COIL TO HAVE!!!!!!! No joke, my SE is locking on targets in nail infested holes that no other coil I own, other than a SR 8 could. I literally had to turn down my gain from 7 because otherwise every target rings in like it's on the surface. Loud and crisp, so much so, that you think it's a large surface target, only to find it's a 22 short at 3 inches. Wish I had time to get out and swing, but buried with work$$$$$. I did get to use it for a couple hours in a field, dense with nails, that I had already hammered the heck out of, pulled 3 Injuns and a really small silver charm 1800's. This is going to be my first coil I use in every site I start at If Mine Lab makes smaller versions of it, take a guess which will be the second coil. Bravo Mine Lab

 

[mattockman]

Its got to be good....You seem to be a nit pick everything over to the bone and I am so suprised you actually give it a high 5....

Please don't take it the wrong way.....I just mean you seem very thurrow and analyse products and give honest opinions of what you think...

Thats what I get from reading your posts anyways....

So Right now I am writing Santa a letter! ....since I am Santa....I guess I will get one!

 

[digitrich]

I didn't have a chance to check it at a "deep" site to see if it was an improvement on depth, but giving how well it separated, it's worth the money just for a "picking through the trash coil", which is amazing considering it's an 11 inch coil. I mean this coil picked up things and locked on coins that it just plain shouldn't have. I pulled a 22 short bullet casing out of a hole at about 4 inches, in the hole and all around it were at least 4-6 nails, all of which were under the 11 inch coil at the same time the 22 short was. But because the lock on is better, I could clearly hear and more importantly recognize the 22 short. That's something a 5 inch coil does, not an 11 inch. If this coil does that at say 8-10 inches...."forget about it".

 

[Mike C...]

So did you buy the coil itself or did you buy whole new SE pro--are these coils available yet and how much are they--sorry for all the questions just curious because it sounds like a really good coil-Thanks-Mike C...AZ

 

[Slay in IA]

I was wondering if you had the SE in fast, deep, neither or both recovery? Ferrous or conductive sounds? Thanks for the info. I'm thinking about getting one.

 

[mattockman]

n/t

 

[SNOWY]

Man O man Digitrich , that's exciting !!!

NOW YA DUN IT ....

I GOTTA GIT ME ONE ! Heh heh.

~ Sounds like it could just about overlap with my X12.

 

[BlackX]

...as well as how much, etc., if just the coil.

 

[digitrich]

In trash: I am usually in all metal, with ferrous tones, fast on, deep off, and almost always in auto sensitivity about 27. Gain at 7, but with this coil, that seemed too much and I had to turn it down. These are the same settings I run all my coils at in trash, however with the really small coils, I can get away with manual sensitivity.

 

[Big Fang Coin Biter]

For the coil only MSRP is $259.95 the sale price is $219.00. But he was told that they would not ship the coils for a few weeks. I think the only folks swinging the new coil have purchased the Explorer SE Pro. I will be definitely trying one out!
HH - BF