WHAT IS YOUR FAST GRAB #

[gmanlight]

I read a good post here on Indian heads and different id # at different depth and knowing soil conditions

can alter detecting depth i was wondering what your typical fast grab # mine is around 80 + or --

I have seen low 40s but not much in between. In a few very small sections of lots ,like new dirt was dump there

Thus putting a FG# to a found coin at x depth can help put it in prospective to others reading posts

 

[jimmyk]

My fast grab is between 55 and 65, for the most part. The deepest IH I've found has been at 7" with a solid mellow signal in all directions. With that kind of signal, I don't pay much attention to the ID meter. I just dig it.

keep on diggin'

jimmyk in Missouri

 

[chuck ky]

so if it sounds good but meter says its a pulltab you dig it anyway? the reason i,m asking is i was hunting without headphones one time and the guy i was with would say aren't you going to dig that. i would say that its a pulltab. he would say but it sounds so good. i finally started digging and it was always a tab.

 

[gmanlight]

By the way my FG # 80 + OR -- Is on MASS/NH border thanks Mike

 

[jimmyk]

ONLY those mellow deep signals are dug in spite of the meter ID. Very deep items don't ID all that well.

jimmyk in Missouri

 

[XLT-user]

Mine varies from place, to place..High as 80's and low as 50 ish some places... Over all average seems to be mid 70......