Find's Treasure Forums

NOTICE:
This new forum is now ACTIVE. You should be able to log in using the same username and password however if your username contain a comma then you need to log in on the new forum without the comma in your username
Example:
SteveB Main, Mo
remove the comma like this
SteveB Main Mo


If you have any questions or need assistance with this, click here to go to Find's Support Desk form


IF YOU ARE NOT ABLE TO LOG IN, CLICK HERE TO RESET AND HAVE NEW PASSWORD EMAIL TO YOU

15" coil for the T2

So nobody on this site owns a 15" coil for the T2? just asking.

if you’re speaking of the teknetics 15” coil It’s pretty heavy. My buddy has one and says after a short time of swinging it it’s like swinging a manhole cover But it’s a deep none the less.
 

wildbill!!

New member
if you’re speaking of the teknetics 15” coil It’s pretty heavy. My buddy has one and says after a short time of swinging it it’s like swinging a manhole cover But it’s a deep none the less.
It sure is cheap enough, 85.00. I have searched youtube and can't find hardly any videos about it's weight and how it performs in the field. Thanks for your input.
 

Beep'n

Member
According to Walmart, the coil weight is 2.5 lbs.
They must have made a pile of those. They have been on sale for a long time, and now they are all the way down to 85 bucks. Used to be about 250 when they first came out.
I have a 15" Coiltek of similar design to the T2 coil and it weighs 2 1/4 lbs.
 
Last edited:

wildbill!!

New member
According to Walmart, the coil weight is 2.5 lbs.
They must have made a pile of those. They have been on sale for a long time, and now they are all the way down to 85 bucks. Used to be about 250 when they first came out.
I have a 15" Coiltek of similar design to the T2 coil and it weighs 2 1/4 lbs.
Man that's heavy! I read the weight was 1lb. So tell me, how bad is it swinging the Coiltek coil?
 

Beep'n

Member
Man that's heavy! I read the weight was 1lb. So tell me, how bad is it swinging the Coiltek coil?
I haven't swung the coiltek. It was for my Excal and I never did the coil Mod. 1 pound for that size coil is false information. I think the standard 11 inch coils are probably a pound. I have the Cors Cannon 14.5x10.5 for my T2 and its not too bad to swing. It weighs about 1 1/2 pounds.
 

wildbill!!

New member
I called Teknetics today they said the 15"coil weighed 1.8 lbs. It took awhile for them to answer this question which seemed kinda strange to me.
 

Beep'n

Member
I called Teknetics today they said the 15"coil weighed 1.8 lbs. It took awhile for them to answer this question which seemed kinda strange to me.
Thats about 1 lb 13 oz. Could be the weight without a coil cover. The cover would add another 6 ounces.
 

wildbill!!

New member
Thats about 1 lb 13 oz. Could be the weight without a coil cover. The cover would add another 6 ounces.
I'm probably going to buy one, $85.00 is cheap for a coil of this size + another 20.00 for the coil cover. It will be good for relic hunting in the woods and in fields. I probably won't use it much but I'll have it if I need it.
 

Beep'n

Member
I think they are built pretty good to not have a cover. The big coils don't get used as much either. Not having the cover will reduce the weight, especially when debris gets stuck in between.
 
Top