Deus 2 HF2 Coil Bootcamp videos

[squirrel1]

 

[squirrel1]

 

[targets]

this coil seems to hold a charge ,i didnt use it for 2 weeks and the battery was full when i checked it

 

[squirrel1]

 

[squirrel1]

 

[squirrel1]

 

[squirrel1]

 

[squirrel1]

 

[squirrel1]

 

[bigtim1973]

The other day when I was trying to take a picture of the TID numbers on the DEUS 2 compared to the ICON remotes I had the Deus 2 on first. Then when I turned on the ICON it interfered and connected to the coil. I know this is not the same exact thing as your pinpoint example but it is very similar.

Also is that some kind of external speaker you have on your WS6? If so what is it?

 

[squirrel1]

The other day when I was trying to take a picture of the TID numbers on the DEUS 2 compared to the ICON remotes I had the Deus 2 on first. Then when I turned on the ICON it interfered and connected to the coil. I know this is not the same exact thing as your pinpoint example but it is very similar.

Also is that some kind of external speaker you have on your WS6? If so what is it?

Here it is.

https://www.amazon.com/dp/B07KQ44VGQ?ref=ppx_yo2ov_dt_b_fed_asin_title

Now I did order 2 of the cables below

https://www.amazon.com/dp/B08MQHXGTZ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

This speaker will work with Deus 2 WS6, Deus 1 WS4 I believe.
Will work with Deus 2 WSAST and WSA2 headphone modules.
Should work with icon/iconx models using WSA2 and WSAST headphone modules.

Now here is the $64,000 question.
Will the speaker above connected to wireless headphone modules and used with icon/iconx models , will this external speaker above be louder than the oem speaker on the unit itself ? IDK.
I will know in a few days if things work out.

 

[bigtim1973]

Here it is.

https://www.amazon.com/dp/B07KQ44VGQ?ref=ppx_yo2ov_dt_b_fed_asin_title

Now I did order 2 of the cables

Very interesting. So it is an active small speaker.

Are you talking about the icon cables?

 

[squirrel1]

Very interesting. So it is an active small speaker.

Are you talking about the icon cables?

Here’s the clip jack for headphone module you’ll need for external speaker setup.

XP WSAST & WS6ST Clip Jack Adaptor - D099-ST

Connect wired headphones to your WSAST & WS6ST module! The clip jack is equipped with a 3.5mm audio jack and slides onto the WSAST & WS6ST puck. This is NOT compatible with WS4, WSA, WS6 & WSA II headphones.

bigboyshobbies.net

 

[squirrel1]

 

[squirrel1]