Hooray! Just received my new 10X14 DD EQ Excelerator coil direct from Detech in Bulgaria. Found that the threaded ring that retains the coil to the detector was a little bent out of shape, but I got that fixed in no time with a little patient bending and shaping. I've only tried it in my back yard, which is TERRIBLE for electrical interference, but I think this one will be a keeper. Heavier than the stock coil but about the same as the 10X12 Butterfly coil (2 inches longer!) I'll be anxious to take this on a regular hunt ASAP. I'll post back with my impressions. This is a very sleek looking coil, and should be good for covering more ground even if the depth turns out to be equal to my other larger coils. I'm used to pinpointing right under where the shaft meets the coil, but the connecting point is offset on this one, and experimenting showed the sweet spot was still in the center of the coil, about an inch and a half in front of where the lower rod connects.