I did some air testing this evening with a measured distance between th back of the coil and going towards the control box marked off from 6" to 16"in inches I tried the LTD against my Etrac,as for the Ltds performance I used 2+ with sens of 60 disc 10 and call this "A", Then sens 80,everything else same as "A" will be "B" ,Boost sens 60,disc 10 will be "C",and finally Cache disc 10 sens 60 will be "D"
ALL FOLLOWING NUMBERS ARE INCHES
GOLD RING A= 9,B= 11,C=13,D=15
ROMAN GROT COIN A=7,B=8 C=10,D=10
COPPER 1/2 PENNY A=10,B=11,C=13,D=16
SILVER LOVE TOKEN A=9,B=12,C=12,D=12
TUDOR CLOTHES FASTENER A=8,B=8 ,C=11,D=12
MILLED SILVER SIXPENCE A=8,B=10,C=11,D=13
All these were the depths the signals degraded from a deffo digger to a walk on signal,I had my doubts about some of the claims but I have done this test on two different days just to satisfy myself,strange that some figures didnt change that much ?with boost and cache mode the item was passed over the coil much slower
I know these are only air tests and people will slag this off but I have no reason to big up the T2 Ltd as I have the Etrac which is top of the range,I just thought some of you may be interested in my findings ,whatever you do dont take these as gospel try it for yourself
Mick