Threshold pitch

[Fired89]

In Andy book on page 145 Jason relic setting threshold pitch is 01 and on goes4ever is threshold pitch is 28-29 does in matter
And if it does how can you save it to each program in the my mode because ever time I try to save the setting to there program it the same on both

 

[grouser]

you should try the emulator and see what tone you like best for the threshold. To me I like the lower tone and can't remember if it actually changes the target tones pitch when you choose a different threshold tone. As far as saving modes you have to set it all up the way you want it,,,, then hit the detect button, THEN go to save and pick a spot to save it in,,,,I think lol

 

[Fired89]

I'll try that when I would the one program to let say at 28 and save then go too the other program and set it to 01 and
Save it to that program then go back to the one that one set at 01 it would 28

 

[Goes4ever]

Do this to test it to see what you like, turn on your etrac and lay it on a table away from any metal. Bring up the screen with threshold pitch on it, wave a silver quarter across your coil with the setting on 1

Now bump it up to 10 and try again, try 15, 20, 25, etc, I like 28-29 because silver just screams out, the tone sounds so easy to distinguish. Pick what suits you, but for me, I will stick with 29 because I like my silver to scream out!!

 

[Fired89]

Goes4ever so your saying that set at 29 works on every program or mode its want suits you the best

 

[Goes4ever]

I have it set at 29 on all modes yes

 

[hershey1]

Me too! You don't have to wonder what is under your coil. I also run the variability up there also. HH

 

[Fired89]

Thanks for the info