Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

New 900 Info.

You may be right Daniel, it looks like I'm going to have plenty of time to put some hours on the new 900 before the Manticore is available. You just never know, I may end up canceling my order. But I sure do like the looks of that 2D screen :) nah, I'm not going to cancel LOL
Yep that’s why I just ordered the 900 it may be all I need and I have a buyer for my 800 which will pay for almost half
 
I sold off my 800 in parts and pieces last week taking a gamble that the 900 would be available very soon. I will end up with a manticore, but it looks like I may be in for a wait.
 
I sold off my 800 in parts and pieces last week taking a gamble that the 900 would be available very soon. I will end up with a manticore, but it looks like I may be in for a wait.
Exactly what I’m doing I figured I can upgrade later mine will be here tomorrow I’ll post a few videos I’ll be out on my silver beach can’t wait
Mark
 
I'm looking forward to your review on it. You always seem to go out and tear it up when you hunt.
Thanks it will be interesting for sure on my sites it’s plenty warm enough and we have had some serious wind and tides that should have moved some bank..you do well to I’ve seen your finds good luck I ordered mine this am from Rich at backwoods great guy I think it’s shipped out of NJ says the FedEx email .
Mark
 
Dan, if you dont mind what is the wireless setup you are using for ear buds??

And what part of our fantastic state do you reside? I am in the Houston area which has about 50-100 demos a week! Cant keep up.
 
Dan, if you dont mind what is the wireless setup you are using for ear buds??

And what part of our fantastic state do you reside? I am in the Houston area which has about 50-100 demos a week! Cant keep up.
I have the Aukey B80's, doesn't look like they make them anymore.... you want to make sure they are rated APTX low latency.....I'm in Llano, northwest of Austin....I envy you:)
 
I was thru Llano the other weekend for my twice yearly hunting camp in Mason. I have been doing this for 20+ years. Always eat at Cooper's & take the leftovers into camp. What is amazing is the explosion of growth over the last few years from Georgetown to Liberty Hill. We have to break camp early in the morning to beat the traffic jams on 29. Maybe Llano will be spared the invasion for a while.
 
I have the Aukey B80's, doesn't look like they make them anymore.... you want to make sure they are rated APTX low latency.....I'm in Llano, northwest of Austin....I envy you:)
So are you using something like a z-link? I realize I can plug in a set of low latency earbuds but I would far rather be sort of cord free.
 
So are you using something like a z-link? I realize I can plug in a set of low latency earbuds but I would far rather be sort of cord free.
I plugged in a wireless transmitter, APTX Low Latency and have a couple of APTX Low latency wireless earbuds.
 

Attachments

  • 900-9.jpg
    900-9.jpg
    1.3 MB · Views: 75
I'm looking forward to your review on it. You always seem to go out and tear it up when you hunt.
Thanks it will be interesting for sure on my sites it’s plenty warm enough and we have had some serious wind and tides that should have moved some bank..
What cuff pad is that on your 900 Dan?
Mark
 
I was thru Llano the other weekend for my twice yearly hunting camp in Mason. I have been doing this for 20+ years. Always eat at Cooper's & take the leftovers into camp. What is amazing is the explosion of growth over the last few years from Georgetown to Liberty Hill. We have to break camp early in the morning to beat the traffic jams on 29. Maybe Llano will be spared the invasion for a while.
That's why we moved from Lago Vista, it turned into a smaller version of Austin ;)
 
Thanks it will be interesting for sure on my sites it’s plenty warm enough and we have had some serious wind and tides that should have moved some bank..
What cuff pad is that on your 900 Dan?
Mark
PM sent...non sponsor seller.
 
Thanks for the information!!👍
Like you, I am wondering about that threaded ear on the coil.
How tight is the lower rod when inserted into the coils ears?
When the coil ears broke on my Xterra 705 they broke through the center of the bolt holes not at the base of the ear. It’s dubious that making the ears wider at the base is going to prevent them from breaking. I think I’ll preemptively reinforce the ears just to be sure. The threaded hole might work out. I plan on replacing the factory bolt with a slightly longer nylon one and adding a wing nut to act as a jam nut after I get the adjustment just right.
 
When the coil ears broke on my Xterra 705 they broke through the center of the bolt holes not at the base of the ear. It’s dubious that making the ears wider at the base is going to prevent them from breaking. I think I’ll preemptively reinforce the ears just to be sure. The threaded hole might work out. I plan on replacing the factory bolt with a slightly longer nylon one and adding a wing nut to act as a jam nut after I get the adjustment just right.
The 900 is so tight of a fit the bolt does not even have to be tightened I used some soapy water to fit it! I don't even want to try to tighten it!
Mark
 
The 900 is so tight of a fit the bolt does not even have to be tightened I used some soapy water to fit it! I don't even want to try to tighten it!
Mark
Mine arrives sometime today. That'll be the first thingI look at after I plug the charger in.😎
 
Mine arrives sometime today. That'll be the first thingI look at after I plug the charger in.😎
You’ll like it it’s a definite step up from the 800 that’s for sure and that coil is a real tight fit I could not bend the ears unlike the 800’s
Mark
 
You’ll like it it’s a definite step up from the 800 that’s for sure and that coil is a real tight fit I could not bend the ears unlike the 800’s
Mark
That bolt is also tight on the 700 11'" coil. The Coiltek 10x6 coil bolt however is a perfect fit. Used it last week before the storm hit. Will be a while before the snow clears enough to detect.
 
Top